Avaya Bogen Universal Bi-Directional Voice Coil Cabinet Speaker Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Lautsprecher Avaya Bogen Universal Bi-Directional Voice Coil Cabinet Speaker herunter. Avaya Bogen Universal Bi-Directional Voice Coil Cabinet Speaker User's Manual [en] Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Universal Bi-Directional
Voice Coil Cabinet Speaker
Description
Issue 1, October 1999
54-2014-01 Printed in USA 9910
© 1999 Bogen Communications Inc. All rights reserved.
Specifications subject to change without notice.
Select Code: 701-000-132
PEC Code: 5330-105
COM Code: 408184026
Model: LUBIDIVCS
Speaker Installation
The Universal Bi-Directional Voice Coil Cabinet Speaker connects to a voice paging system's Voice Coil output. This speaker
can be used as a wall, ceiling, or corridor speaker.
ATTENTION: This speaker is designed to be used in an office environment.
The Universal Cabinet Speaker should be mounted indoors on a flat surface, such as a wall or ceiling.
Note: When required, the speaker may also be mounted on a pole by using metal banding tape, or other suitable material, to
secure the bracket to the pole.
Use the bracket as a template and mark a screw location in the center of each keyhole slot.
Note: Ensure that the mounting position allows for easy wire connection and volume adjustments.
Install screws in the locations marked. Use anchors if necessary to provide a solid mounting (screws and anchors are
provided). Leave enough room so the bracket can be slipped over the screw heads.
1
2
Attenuator Control
(Volume)
Speaker Wire Connection
Speaker
Mounting
Bracket
Screw
(-)
(+)
(-)
(+)
Maintain proper speaker phasing. Each conductor in the speaker wire must be connected to the same terminal on each
speaker, as shown below.When using shielded speaker wire, and wiring from speaker to speaker, wire the shield drains to
provide a continuous shield to the next speaker.The shield wire should never be terminated on the speaker.
Note:
Use 22 AWG shielded, twisted pair on all wire runs. Com Code: 401882956. Pec Code: 2734-SPK.
Note: Connections shown are for
interconnected speakers. A single
speaker does not require outgoing
wiring.
3
Page 1 of 1
Red screw is (+). Silver screw is (-).
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - Voice Coil Cabinet Speaker

Universal Bi-Directional Voice Coil Cabinet SpeakerDescriptionIssue 1, October 199954-2014-01 Printed in USA 9910© 1999 Bogen Communications Inc. All

Kommentare zu diesen Handbüchern

Keine Kommentare