Avaya 4600 Series IP Telephones Bedienungsanleitung Seite 4

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 18
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 3
BDH Editor; Reviewed: RJS,
JWS,CLB,ML,RS,RKP,TGS,BH,
PMS, RGF, NHK 4/20/06
Application Notes
©2006 Avaya Inc. All Rights Reserved.
4 of 18
CID 117689
support software file transfers via HTTP/HTTPS and many configurations might have a mixture
of telephones that support HTTP/HTTPS downloads and telephones that only support TFTP
downloads. See section Configuring IP Telephones to use HTTP/HTTPS for further details.
3. IP Telephone Software File Transfers Using TFTP
3.1. TFTP Protocol Support
Existing 46xx IP telephones support software downloads using TFTP. These software
downloads can be found on the Avaya support website.
The S8300B or later S8300 Media Servers are the only Media Servers that support 46xx IP
telephone file transfers using TFTP, and only when running Communication Manager 2.1.1 or
later, and only when transferring files to no more than 20 telephones. See the
TFTP Performance
section for further details.
3.2. Configuring S8300 Media Servers for TFTP File Transfers
3.2.1. Enabling TFTP Network Services
Note: The configuration instructions and web page screen shots provided are intended as a
general example and the specifics are different between different releases of Communication
Manager. Communication Manager 3.1 was used for the examples in this document.
The TFTP Service and Firewall must be enabled on the S8300B or later S8300 Media Server via
the Maintenance Web Pages. In Communication Manager 3.1 and later releases the TFTP
Service must be enabled by clicking on Server Access under the Security heading and enabling
the TFTP Service appropriately (See
Figure 1: Enabling ). In releases of Communication
Manager earlier than 3.1 this step is not needed because the TFTP Service is enabled by default
and the Server Access page is not available.
The Firewall must be enabled to support TFTP and this is done by clicking on Firewall under
the Security heading and allowing input to the server via the TFTP port (See Figure 2: Enabling
). In some releases of Communication Manager the Advanced Setting button must be clicked to
allow input to the server via the TFTP port.
Seitenansicht 3
1 2 3 4 5 6 7 8 9 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare