Avaya (115066-A Bedienungsanleitung

Bay Networks, Inc., Corporate Headquarters4401 Great America Parkway, Santa Clara, CA 950548 Federal Street, Billerica, MA 01821 Part No. 115066-A Re

10 Part No. 115066-A Rev. B Figure 7. Aligning the Fast Packet Cache Module (Initial Installation on ASN)ASN0066AMounting holesConnector

11 Part No. 115066-A Rev. B Figure 8. Aligning the Fast Packet Cache Module (Initial Installation on SN) Replacing the ASN Component Tray To replace

12 Part No. 115066-A Rev. B Replacing the Switch Node CPU Module To replace the SN CPU module: 1. Make sure the module levers are parallel to the fro

13 Part No. 115066-A Rev. B 6. Turn on the Switch Node. 7. Observe the CPU module LEDs to determine whether the module is functioning properly. Refer

2 Part No. 115066-A Rev. B Removing the ASN Component Tray To remove the ASN component tray: 1. Turn off the ASN, and detach all cables from the back

3 Part No. 115066-A Rev. B Figure 1. Removing the ASN Component Tray CaptivethumbscrewsComponent trayASN0031APhillipsscrewdriver

4 Part No. 115066-A Rev. B Removing the Switch Node CPU Module To remove the SN CPU module: 1. Turn off the Switch Node. 2. Disconnect any modem and

5 Part No. 115066-A Rev. B Figure 2. Removing the Switch Node CPU Module You are now ready to replace or install the Fast Packet Cache module. Go to

6 Part No. 115066-A Rev. B Removing the Fast Packet Cache Module To remove the Fast Packet Cache module: 1. Using needle-nose pliers, pinch the plast

7 Part No. 115066-A Rev. B Figure 4. Locating the Fast Packet Cache Module (SN) 2. While using the pliers to push down on each standoff, lift up on t

8 Part No. 115066-A Rev. B Figure 5. Releasing the Module from the Standoffs 3. Grasp the sides of the module and pull up to release it from its conn

9 Part No. 115066-A Rev. B Installing the Standoffs The Fast Packet Cache module ships with 4 plastic standoffs. If you are installing a Fast Packet