Avaya COMPANION Konfigurationsanleitung PDF herunterladen (Seite 39)

Chapter 1 Installing the Companion system 39

Business Communications Manager Companion Configuration Guide

To install an outdoor omnidirectional external antenna, follow these steps:

1 Screw the antenna mounting plate vertically to the exterior wall of the building with lag bolts

or other appropriate hardware. The following figure shows how to fasten the mounting plate.

Figure 16 Install the outdoor omnidirectional external antenna (Canada)

2 Feed one end of the coaxial cable up through the bottom of the antenna cover and

attach the BNC connector to the base of the mast.

3 Slide the mast down into the cover until it fits.

4 Rotate the mast until the threaded hole in the base of the mast aligns with the set screw

hole in the cover. Tighten the set screw.

5 Route the coaxial cable along the bottom edge of the plate between the cover and the

wall plate.

Note: The total length of the coaxial cables from the outdoor antenna to the base station must

not exceed 10 m (33 ft.).

6 Tie the cable to the mounting plate.

7 Insert the plastic plug into the base of the cover to keep moisture out.

8 Feed the coaxial cable through the wall to the surge protector on the interior wall.

Plastic plug

Connector

at the base of

the mast

Shroud

Mast

Co-axial cable to

surge protector on

interior wall

Set screw

Cable ties

Exterior wall

mounting plate

Lag bolts or other

appropriate mounting

hardware

Mast

Set screw

Exterior wall

mounting plate

Lag bolts (or

appropriate

mounting hardware

Connector at

the base of

the mast

Shroud

Plastic plug

Cable ties

Co-axial cable to

surge protector on

interior wall

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 65 66

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya COMPANION Konfigurationsanleitung Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Anrufbeantworter Geräte Avaya COMPANION