Avaya Quick-Starting Routers and BNX Platforms Bedienungsanleitung PDF herunterladen (Seite 21)

Overview of Quick-Start

1-3

Connect a PC or ASCII console to the router.

Connect a PC or a terminal to the router’s or BNX platform’s console port to

view the Technician Interface (Chapter 3).

Connect to the IP network.

Connect a cable between the router or BNX platform and the IP network

(Chapter 4).

Establish a Technician Interface session.

Use the Technician Interface, Bay Network’s command-line interface, to enter

commands to run the Quick-Start installation script on the router (Chapter 5).

Run the Quick-Start installation script.

Run Quick-Start to establish an initial IP network interface between the router

or BNX platform and the workstation from which you’ll manage the router

(Chapter 6).

Install Site Manager.

Install the Bay Networks Site Manager program on a PC or workstation

located on the IP network. Site Manager uses Simple Network Management

Protocol (SNMP) and Trivial File Transfer Protocol (TFTP) to communicate

with the router or BNX platform so you can remotely conﬁgure and manage

the router.

Follow the instructions in the appropriate chapter to install the Site Manager

software on a

— PC (Chapter 7)

— SPARCstation (Chapter 8)

— RS/6000 (Chapter 9)

—HP

9000 (Chapter 10)

Note:

BNX Site Manager does not run on the HP 9000 workstation.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 119 120

Keine Kommentare

Avaya Quick-Starting Routers and BNX Platforms Bedienungsanleitung Seite 21