Avaya Configuring VRRP Services Bedienungsanleitung PDF herunterladen (Seite 20)

Configuring VRRP Services

2-2

304138-A Rev 00

• Virtual router ID

The virtual router ID (VRID) identifies the virtual router. VRRP uses the

virtual router ID to calculate the virtual router’s virtual MAC address. If the

virtual router is in the primary virtual router state, it responds to all ARP

requests using the IP address of the virtual router with its virtual MAC

address, not its physical MAC address. You cannot change the virtual router

ID after you configure a virtual router.

• Virtual router IP address

The virtual router IP address identifies the IP address that the virtual router

backs up.

To configure a virtual router, complete the following tasks:

Caution: If you are configuring virtual routers on the IP interface used as the

Site Manager management console, you should not add or modify a backup

virtual router before you create a master virtual router. Otherwise, you can lose

connectivity to the router when dynamically configuring virtual routers. Use

local or remote mode when configuring a virtual router.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

VRRP

. The IP VRRP Configuration Parameters

window opens.

4. Click on

Add

. The Add Virtual Router window opens.

5. Set the following parameters:

• Primary IP Address

• Virtual Router ID

• Virtual Router IP Address

Click on

Help

or see the parameter

descriptions starting on page A-2.

6. Click on

. You return to the Configuration Manager

window.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring VRRP Services Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller Avaya Configuring VRRP Services