Avaya V1.0) Bedienungsanleitung PDF herunterladen (Seite 4)

Read Me First: Router Software 11.00 Rev. 4n and Site Manager 5.00 Rev. 4n

114593-A Rev. A

Interface from a direct console connection.

____________________________________________________________

Anomaly: Netboot works on DSU/CSU only when configured for the default, 56-Kb/s DDS lines.

Number: 27815

Description: Netboot fails over a DSU/CSU interface configured for Clear Channel 64-Kb/s lines

(Configuration Manager > Edit DSU/CSU > Option Mode = CC-64KBPS).

____________________________________________________________

Anomaly: The ARN initiates dial service calls on an internal console modem set to Answer Only.

Number: 27819

Description: On an ARN with both an internal console modem and an external modem, the router

initiates calls on the internal rather than the external modem, even though the internal

modem is set to Answer Only. The call attempt fails and the router eventually initiates

calling on the correct modem, but only after three retries.

Workaround: Ensure that the internal console modem is not used by setting its wfSyncPriority to a

high number (for example, 99).

____________________________________________________________

Anomaly: When configuring a second circuit using the

inst_arn

bat

script, selecting static route

from the IP Routing Protocol Configuration menu causes a fault condition.

Number: 27829

Description: When you are configuring a second circuit using the

inst_arn

bat

script, and you select

static route (option 3) from the IP Routing Protocol Configuration menu, the following

error message appears:

Variable: Undefined Variable - dlci_mgt

The

inst_arn

bat

script returns you to the IP Static Route to Site Manager Configuration

window. The script continues to loop in this manner without allowing you to configure

the second circuit with IP static routes.

Workaround: Do not add a second circuit that contains IP static routes.

____________________________________________________________

1 2 3 4

Keine Kommentare

Avaya V1.0) Bedienungsanleitung Seite 4