Avaya BCM First Time Installationsanleitung PDF herunterladen (Seite 6)

6 / Installation overview

P0993238 Issue 01

8. Make sure the voltage switches on the BCM power supply are set to the correct voltage.

Note: If you are installing a BCM400 with a redundant power supply, you do not need

to set the voltage switch. The redundant power supply automatically switches to

the correct voltage.

9. Plug the AC power cord into the BCM and the AC power outlet.

10. Connect the telephony wiring of the telephones and peripherals to the BCM.

Note: Do not connect the Public Switched Telephone Network (PSTN) lines to the

Business Communications Manager system until after you connect the AC power

cord. Do not connect the data network wiring until you enter the correct IP

address for the Business Communications Manager system.

For more information about how to install Business Communications Manager equipment,

refer to the Business Communications Manager 3.0 Installation and Maintenance Guide.

Initializing the Business Communications Manager software

After you connect power to the Business Communications Manager system, you need to set the

initial configuration parameters. One of these initial parameters is the IP address. This IP

address is required to connect to the Business Communications Manager system using Unified

Manager. Unified Manager is the application you use to program the Business

Communications Manager system.

The default IP address of the Business Communications Manager system is:

• IP: 10.10.10.1

• Subnet: 255.255.255.0

Ask the network administrator before you connect the Business Communications Manager

system to the network to make sure there are no conflicts.

If you can use the default IP address, refer to Connecting using the network interface card on

page 6.

If you cannot use the default IP address, refer to Changing the default IP address on page 11

Connecting using the network interface card

1. Connect the data network wiring to the LAN and WAN cards in the BCM.

2. Use the Quick Install wizard to set the initial configuration parameters. For information

about the Quick Install wizard, refer to Using the Quick Start wizard on page 7.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Avaya BCM First Time Installationsanleitung Seite 6