Avaya BCM450 Konfigurationsanleitung PDF herunterladen (Seite 7)

NC; Reviewed:

10/01/2010

Avaya BCM Solutions Test Lab

Application Notes

Reserved.

7 of 14

ConfiguringSIPTrunkingSkype-BCM6

Page 7 of 14

5.0 System Configuration

This section provides procedures for configuring a SIP trunk on BCM Rls. 6.0 to Skype.

5.1 BCM Configuration

In order to configure a SIP trunk between BCM and

Skype, do the following:

5.1.1 IP Trunks Settings Configuration

1. Navigate to

Configuration



Resources



IP Trunks



General

3. Ignore in-band DTMF in RTP: by clicking on the check box next to it.

Click on the “IP Trunks Settings” tab

5.1.2 SIP Media Parameters Configuration

1. Navigate to

Configuration



Resources



IP Trunks



SIP Trunking

3. In the Preferred Codecs section, configure G.729, G.711-uLaw as the first and second

preferred codec respectively.

Select the Media Parameters tab.

4. In the codec Settings section,

• In the codec Settings section, select 20ms as the payload size for both G.729 and

G.711

• FAX is not supported by Skype.

• Provide in-band ringback must be left unchecked.

5.1.3 Importing Skype Template to BCM

1. Navigate to

2. Select the Public tab.

Configuration



Resources



IP Trunks



SIP Trunking

3. Select the ITSP Templates tab

4. Click on the Import button

5. Select Yes to acknowledge the warning

6. An Import Files dialog box will open

7. Click on Browse and navigate to the directory containing the Skype templates

8. Select the Skype template and click on Select Files

9. Click the OK button to import the template to the BCM

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM450 Konfigurationsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya BCM450