11/11/2010
©2010 Avaya Inc. All Rights
Reserved.
ConfiguringSIPTrunkingMTS Allstream-
BCM6
Page 9 of 13
4.2 Dialing Plan
4.2.1 Line Pool Configuration
1. Under Configuration
Telephony
Dialing Plan; select
2. Select BlocA.
Line Pools.
3. Click on the “Add” button to add DNs of sets that need to access the above line pool.
4.2.2 Dial Plan Configuration
1. Under Configuration
Telephony
Dialing Plan
Public Network, define the Public
Received number length. Check with MTS Allstream for the appropriate value.
2. Set the Public Network Dialing Plan to Public (Unknown)
3. In the Public Network DN Lengths table, configure the DN prefixes and their corresponding
lengths.
4. Under Configuration
Telephony
Dialing Plan
Routing, and select the Routes tab
5. Add a route by clicking on the Add button.
6. In the Add Route dialog box, provide an unused route and click on the OK button. This is the
preferred route.
7. The Dialing Plan – Routing table will be displayed.
8. Click on the route just created
9. Under the External Number column of the newly created route, insert a number that will
appended to the dialed number and presented to the SIP trunking module on the BCM for
routing. This number will be stripped off before routing the call to MTS Allstream.
10. Under the Use Pool column of the newly created route, double click to select BlocA from the
drop down list.
11. Under the DN Type column of the newly created route, double click to select Public (Unknown)
from the drop down list.
12. Repeat Steps 5 to 10 to add a backup route. This route will be used if the attempt to route the
call via the preferred route fails. In the External Number column for this secondary route,
provide a number which is different from that used in Step 9..
13. Click on the Destination Codes tab.
14. Configure a destination code to route dialed digits by clicking on the Add button. Digits that
begin with this destination code will be presented to the SIP trunking component on the BCM for
routing towards the Service Provider.
15. In the Add Destination Code dialog box, enter a numeric number for the destination code and
click on the OK button.
16. Select the row representing the Destination Code entered in the previous step
(45 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern