
Configuring AppleTalk Services
4-22 117366-A Rev. A
4. Click on OK to exit the window and save your changes when you are
finished.
Parameter: Enable
Default: Enable
Options: Enable
| Disable
Function: Enables or disables AURP on the router.
Instructions: Set to Disable if you want to globally disable AURP.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.8#2
Parameter: Local IP Address
Default: None
Options: Any valid 32-bit IP address using dotted-decimal notation; for example,
205.1.8.2
Function: Identifies an IP interface on the router. This is the IP interface used for
AURP.
Instructions: Enter the IP address of the interface on this router that AURP should use.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.8#5
Editing AURP Interface Parameters
You use the AURP interface parameters to configure an AURP connection. To edit
an AURP connection, begin at the Configuration Manager window:
1. Select Protocols > AppleTalk > AURP > Interfaces.
The AT AURP Interface Configuration window appears (F
igure 4-9).
Kommentare zu diesen Handbüchern