Avaya Configuring APPN Services Bedienungsanleitung Seite 103

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 154
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 102
Editing APPN Parameters
114049 Rev. A 3-39
Parameter: Enable DLUR Support for this LS
Default: Disable
Options: Enable
| Disable
Function: Specifies whether the adjacent link station is a PU2.0 node to be serviced
by DLUR.
Instructions: Click on Values and select Enable or Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.4.1.28
Parameter: Primary DLUS Name
Default: None
Options: Any valid name with up to 17 characters in the format <NETID.NAME>;
NETID is the unique network name with up to 8 characters followed by a
period, and NAME is the control point name with up to 8 characters
Function: Specifies the fully qualified name of the DLUS node that will serve the
PU2.0 link station.
Instructions: Type up to 8 characters for the network ID name; follow with a period,
and then type a control point name with up to 8 characters. You must use
uppercase characters only and the first character must be non-numeric.
Blank spaces (leading, trailing, and embedded) are not allowed in the
node name. For example, APPNNODE.DLUR is a valid entry for this
parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.4.1.30
Parameter: DSPU Name
Default: None
Options: Up to 8 alphanumeric uppercase characters.
Function: Specifies the name of the down stream physical unit (DSPU) supported by
DLUR.
Instructions: Enter up to 8 alphanumeric uppercase characters with no blank spaces
(leading, trailing, or embedded).
MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.4.1.29
Seitenansicht 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 153 154

Kommentare zu diesen Handbüchern

Keine Kommentare