Avaya Configuring Aura Messaging 6.1 as a Voice Messaging Solution Bedienungsanleitung PDF herunterladen (Seite 14)

PM; Reviewed:

SPOC 02/26/2013

Solution & Interoperability Test Lab Application Notes

14 of 47

AAM61SM61BCM60

6.1.2. Routing Settings

This section describes how to configure the dialing plan, routes and pool that will be used by the

Avaya BCM to connect to PSTN.

Navigate to Telephony



Dialing Plan



Routing.

In Routes tab to add a new route to PSTN by click on the Add button. Enter the route number

002 and click OK when Done.

Double click on new created Route and assign value to the route as below, other leave as default:

Use Pool: BlocB.

DN Type: Private.

Service Type: Tie.

6.1.3. Administer Destination Codes

To assign Destination Codes to dial to PSTN via PRI. Perform similar step as shown in section

5.3.2 for with the following information

Destination Code: 4521. Extension on Avaya Communication manager is 52xxx. Digit 4

to let Avaya BCM route the call through route 002

Normal Route: 002.

Absorbed Length: 1. Drop the first digit 4.

6.1.4. Administer Telephony Lines

Assign the pool to telephone line by navigate to Telephony



Lines



Active Physical Lines.

Double click on a selected line under the Line Type, choose Pool:BlocB in this example as

shown below.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 46 47

Keine Kommentare

Avaya Configuring Aura Messaging 6.1 as a Voice Messaging Solution Bedienungsanleitung Seite 14