Avaya Configuring BFE Services Bedienungsanleitung PDF herunterladen (Seite 40)

Configuring GRE, NAT, RIPSO, and BFE Services

2-16

305753-A Rev 00

For example, the following command sequence configures the remote end point

austin with the physical interface 197.1.2.4 and verifies the entry:

gre/boston# remote-endpoint austin address 197.1.2.4

remote-endpoint/austin#

info

name austin

address 197.1.2.4

logical-ip-address 0.0.0.1

logical-ipx-address 000000000001

state enabled

Step 2. Configuring a Remote Logical Interface

Using the BCC, you can configure a logical interface for a remote end point.

Configuring a Remote Logical IP Interface

To configure a remote logical IP interface, navigate to the remote GRE tunnel

interface prompt (for example,

box; tunnels; gre/boston; remote-endpoint/

austin

) and enter:

logical-ip-address

address

is a valid IP address expressed in dotted-decimal notation.

For example, the following configures the remote GRE tunnel logical IP interface

for the remote end point austin to 9.9.9.2 and verifies the change:

remote-endpoint/austin#

logical-ip-address 9.9.9.2

remote-endpoint/austin#

info

name austin

address 197.1.2.4

logical-ip-address 9.9.9.2

logical-ipx-address 000000000001

state enabled

Note:

When you configure a remote physical end point, the BCC

automatically inserts a default address value for the remote logical interface.

For IP, the default address is 0.0.0.1; for IPX, it is 00000000001. These

addresses are not valid. Until you configure valid logical addresses, the tunnel

will not come up.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 179 180

Keine Kommentare

Avaya Configuring BFE Services Bedienungsanleitung Seite 40