Avaya Configuring IP, ARP, RIP, and OSPF Services Bedienungsanleitung PDF herunterladen (Seite 313)

Site Manager Parameters

308627-14.00 Rev 00

A-63

Parameter: Hello Interval

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Virtual Interfaces

Default: 15 seconds

Options: 1 to 360 seconds

Function: Indicates the number of seconds between the Hello packets that the router

sends on the interface. Nortel Networks suggests the following values for this

parameter: for broadcast, 10 seconds; for point-to-point, 15 seconds; for

NBMA, 20 seconds; for point-to-multipoint, 15 seconds.

Instructions: Either accept the default value of 15 seconds or set the Hello Interval

parameter to another value from 1 to 360 seconds. This value must be the same

for the virtual neighbor and for all routers attached to the same network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.7.1.8

Parameter: Dead Interval

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Virtual Interfaces

Default: 60 seconds

Options: 1 to 2000 seconds

Function: Indicates the number of seconds that a router’s Hello packets have not been

seen before its neighbors declare the router down. This value should be some

multiple of the Hello interval. Nortel Networks suggests the following values

for this parameter: for broadcast, 40 seconds; for point-to-point, 60 seconds;

for NBMA, 80 seconds; for point-to-multipoint, 60 seconds.

Instructions: Either accept the default value of 60 seconds, or enter another value for this

parameter. This value must be the same for all routers attached to the same

network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.7.1.9

1 2 ... 308 309 310 311 312 313 314 315 316 317 318 ... 373 374

Keine Kommentare

Avaya Configuring IP, ARP, RIP, and OSPF Services Bedienungsanleitung Seite 313