Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 15)

303537-A Rev 00

Preface

This guide describes PPP and what you do to start and customize PPP services on

a Bay Networks

router.

You can use the Bay Command Console (BCC

™

) or Site Manager to configure

PPP on a router. In this guide, you will find instructions for using both the BCC

and Site Manager. If you choose to accept all the default parameters to start PPP

on the router, you can use either BCC or Site Manager. If you choose to configure

individual parameters, however, you will find that several parameters are not yet

configurable with the BCC. In these cases, you must use Site Manager.

Before You Begin

Before using this guide, you must complete the following procedures. For a new

router:

• Install the router (see the installation guide that came with your router).

• Connect the router to the network and create a pilot configuration file (see

Quick-Starting Routers, Configuring BayStack Remote Access, or Connecting

ASN Routers to a Network).

Make sure that you are running the latest version of Bay Networks BayRS

™

and

Site Manager software. For information about upgrading BayRS and Site

Manager, see the upgrading guide for your version of BayRS.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 149 150

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 15