Avaya Configuring XNS Services Bedienungsanleitung PDF herunterladen (Seite 49)

Editing XNS Parameters

303548-A Rev 00

4-13

Parameter: Split Horizon Algorithm

Default: Enable

Options: Enable

Disable

Function: When the interface forwards RIP and SAP updates, it can exclude RIP

and SAP broadcast updates learned on that interface.

Instructions: Select Enable if you previously set this parameter to Disable and now do

not want the router to transmit RIP and SAP updates received from the

interface over that interface.

Select Disable only if you want the router to transmit RIP and SAP

updates it receives from the interface over that interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.3.1.30

Editing RIP Interface Parameters

If you enable RIP on an XNS interface, you can edit its RIP parameters by

accessing the XNS RIP Interfaces window. (The following instructions describe a

RIP-enabled XNS interface as an XNS RIP interface.)

For instructions on how to add an XNS RIP interface to a circuit, refer to

Configuring and Managing Routers with Site Manager. To edit the configurable

RIP parameters of an XNS interface, begin at the Configuration Manager window

(refer to Figure 4-1):

Select Protocols > XNS > RIP Interfaces.

The XNS RIP Interfaces window appears (Figure 4-4)

. The window shows at

the upper left a list of all XNS RIP interfaces configured on the selected

circuit.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Keine Kommentare

Avaya Configuring XNS Services Bedienungsanleitung Seite 49