Avaya Configuring BayStack Remote Access Bedienungsanleitung PDF herunterladen (Seite 118)

Configuring BayStack Remote Access

C-4

117341-B Rev. 00

Global Information Worksheet

This section contains the prompts and options for all BayStack router synchronous

configurations.

Global Information Worksheet

Prompt Options Your Response

Enter the module number

[1]:

AN/ANH only:

Because the AN/ANH is not a

link module, the router bypasses this step

and automatically accepts a default slot of 1.

ARN only:

The script lists the modules that

you can use to connect the router’s IP

network interface to Site Manager.

For example, the script might offer the

following options:

1. Ethernet on Base Module

2. Serial on Adapter Module 1

3. Ethernet Tri-Serial on Expansion Module

Enter the number that

corresponds to the

module you want to use.

Driver Type:

If there is only one interface on the module

you chose, the script automatically selects

the driver type for that interface and

bypasses this prompt. Otherwise, the script

displays a menu of driver types. The actual

menu depends on the modules you have

installed.

Enter the number that

corresponds to the driver

for the module you

selected.

For serial interfaces and

all WAN adapter modules,

choose the synchronous

driver.

Enter connector number [1]:

If there is only one connector on the module

you chose, the script automatically assigns a

connector number and bypasses this prompt.

Otherwise, the script lists the available

connectors. For example, for an ARN with

five serial connectors, the options are as

follows:

1. COM1

2. COM2

3. COM3

4. COM4

5. COM5

For information about the

module locations and

connector names, see

Tables 3-1 to 3-4 in

Chapter 3.

(continued)

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 137 138

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring BayStack Remote Access Bedienungsanleitung Seite 118

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router Avaya Configuring BayStack Remote Access