Avaya Synchronous Net Modules in an ASN Platform Bedienungsanleitung PDF herunterladen (Seite 21)

Test Part Number BNX Software Version <x.x>

Installing a Net Module1

Chapter 1

Installing a Net Module

This chapter describes tasks that you perform to install a net module in an ASN.

Each of the synchronous net modules requires the ASN to be running a speciﬁc

version of router software as follows:

• The Dual Sync net module requires Version 8.00 or later.

• The Quad Sync net module requires Version 11.00 or later.

To install a net module:

1. Remove the ASN component tray.

2. Attach the antistatic wrist strap.

3. Remove the ﬁller brackets.

4. Remove the net module you want to replace from the ASN (if necessary).

5. Install the new net module.

6. Replace the ﬁller brackets.

7. Disconnect the antistatic wrist strap.

8. Replace the component tray.

Note:

Experienced network operators can safely perform the user-serviceable

procedures that are described in this book.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 71 72

Keine Kommentare

Avaya Synchronous Net Modules in an ASN Platform Bedienungsanleitung Seite 21