5 Avaya Video Camera 100 Installation Guide
Installation Prerequisites
Before installing Avaya Video Camera 100, complete the following tasks:
• Select a mounting option for the camera:
- desktop mount—a movable mount for positioning the camera on a desk or table.
- display mount—a fixed mount for positioning the camera on top of a display
connected to your Avaya video communications system. The mount attaches to the
display with an adhesive tape located under the base of the mount. The adhesive
requires 72 hours to achieve full bond strength at room temperature. Plan your
installation to allow time for the adhesive to bond securely to the display.
The adhesive tape is intended for a single use and permanent application. Avaya
recommends that you determine the optimal area for placing the camera by
removing the lens cap and connecting it to the codec as described in this document
before attaching the mount to the display. For information about techniques that you
may consider for removing the adhesive tape and cleaning the adhesive residue
from the display surface, contact the 3M company to obtain product documentation
for 3M VHB tapes. To obtain a replacement display mount, contact your Avaya
reseller.
WARNING: Use the desktop and display mounts on a horizontal surface only. Using
either mount on a vertical surface or on a surface with a slope greater than 10 degrees
may cause the camera to detach from the mount resulting in damage to the camera.
- tripod socket—a 1/4-20 UNC threaded socket for connecting the camera to a
tripod. Refer to “Using the Tripod Socket” on page 9.
Note: Avaya Video Camera 100 does not include a tripod.
• If you intend to use the camera as the active microphone for audio input during calls,
follow these guidelines to optimize camera placement:
- Avoid placing the camera less than .5 meters (1.64 feet) away from the front of the
speakers connected to your Avaya video communications system.
- Avoid placing devices that generate noise (such as fans or personal computers)
between video conference participants and the camera.
- The camera microphones attenuate sound directed at the back of the camera. Place
the camera in a location that ensures video conference participants speak in front of
the camera from a distance greater than .5 meters but less than 2.5 meters (8.2
feet).
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern