Avaya Quad Serial PMC Module Supplement Bedienungsanleitung PDF herunterladen (Seite 23)

Using the Quad Serial PMC Module

311905-B Rev 00 1-7

For more information about which 44-pin serial cable to use, see “Cabling” on

page A-1.

To connect the serial interface cable to the quad serial interface:

1. Connect the 120-pin portion of the 120-pin to quad 44-pin adapter

(Figure 1-6).

This quad serial adapter cable is required to connect up to four 44-pin cables

to the quad serial PMC modules.

Figure 1-6. Quad Serial PMC Module Cable Connection

Secure the quad serial adapter cable to the interface PMC module using

the captive screws on the cable.

The screws should be tightened completely.

3. Locate the serial interface cables and connect one to each end of the quad

serial adapter cable. Make sure the screws are tightened completely.

The serial interfaces automatically configure the desired electrical interface

when used with standard keyed cables.

4. Arrange the cable in the cable loom.

For instructions, see “Using the Cable Looms to Manage Cables” in Installing

and Operating the Passport 5430 Multiservice Access Switch.

5. Connect the remote end of each cable to the appropriate communications

equipment.

Pin 31

Pin 61

Pin 1

Pin 91

Pin 60

Pin 90

Pin 30

Pin 120

CAB0116A

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Keine Kommentare

Avaya Quad Serial PMC Module Supplement Bedienungsanleitung Seite 23