Avaya Quick2Config Bedienungsanleitung PDF herunterladen (Seite 57)

Chapter 4 Installing the Quick2Config standalone client 57

Installing and Administering Optivity Quick2Config 2.2

Verifying the client installation on UNIX systems

To verify that the standalone client software has been installed correctly:

Start the Quick2Config server if it is not running.

If the server is installed on a Windows system, see “Starting the Quick2Config

server” on page 32.

If the server is installed on a UNIX system, see “Starting the Quick2Config

server” on page 42.

Open a command window, and navigate to the location of the Quick2Config

program files by typing the following command:

cd /usr/Quick2Config/client/bin

Type the following command:

./client.sh

After a few moments, the Optivity Quick2Config Login dialog box opens,

indicating that the Quick2Config client software has been installed correctly.

The Optivity Quick2Config Login dialog box displays the following information:

• The host name, which is the name of the computer that is running the

Quick2Config server. Type the host name or the IP address of the system that

is running the Quick2Config server.

• The default port for the Quick2Config server, which is 7000.

• The Previous Servers list, which contains the host names and ports of

Quick2Config servers that the client computer has accessed. (The dialog box

displays the host name and port number of the server that was last accessed by

this client computer.) Because this is the first time that you have started a

session, the list contains one entry—the name of the server where you

installed the server and port 7000.

You are now ready to log in to the Quick2Config server. If you did not complete

the setup tasks after you installed the server, you should complete them now. See

Chapter 5, “Setting up Quick2Config,” on page 61.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 97 98

Keine Kommentare

Avaya Quick2Config Bedienungsanleitung Seite 57