Avaya Configuring ATM DXI Services Bedienungsanleitung Seite 66

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 74
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 65
Configuring ATM DXI Services
A-6 117375-A Rev. A
Parameter: Mode
Path: Configuration Manager > Protocols > ATM DXI > Interfaces > PVCs
Default: Group Access
Options: Group Access
| Hybrid Access | Direct Access
Function: Specifies the role of the PVC.
Instructions: Accept the default, group access, if you want the PVC to be part of a group of
PVCs. Set to hybrid access if you want the PVC to be part of a group of PVCs
for routing, and to direct access for bridging. Set to direct access if you want the
PVC to be used for bridging or routing to different networks.
For more information about the three modes, refer to “Access Modes f
or ATM
DXI Services” in Chapter 2.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.5.14.1.9
Parameter: Multiprotocol Encapsulation
Path: Configuration Manager > Protocols > ATM DXI > Interfaces > PVCs
Default: LLC/SNAP
Options: LLC/SNAP
| NLPID | NO MPE
Function: Determines whether the outbound packets on the selected interface are
encapsulated with a multiprotocol header per RFC 1490 (NLPID) or RFC 1483
(LLC/SNAP). All direct access mode PVCs configured for the selected interface
use the value of this field.
Instructions: We recommend selecting LLC/SNAP.
If you are running an ATM DXI version earlier than Version 8.00, select NLPID
for backward compatibility.
If you select NO MPE, the router interprets this as virtual channel-based
multiplexing, which is not supported for bridging.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.5.14.1.12
Seitenansicht 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 72 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare