Avaya Configuring IP Multicasting Services Bedienungsanleitung Seite 99

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 103
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 98
Site Manager Multicast Parameters
114064 Rev. A A-25
Parameter: Route Exploration Capability
Path: Configuration Manager > Protocols > IP > ST2 > Neighbors
Default: No
Options: Yes
| No
Function: Specifies whether the neighbor is capable of route exploration.
Instructions: Determine this characteristic of the ST2 neighbor and supply the proper value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.3.1.2.4
Parameter: Hello Protocol
Path: Configuration Manager > Protocols > IP > ST2 > Neighbors
Default: Enable
Options: Enable
| Hello When Stream Active | Disable
Function: Specifies whether the router should send hello messages to the neighbor. The
parameter also specifies the type of hello procedure.
Instructions: Select Enable to use the normal Bay Networks hello procedure. Select Hello
When Stream Active to use the hello procedure only when a stream is running
to a neighbor. Select Disable to disable the feature on the interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.3.1.2.5
Parameter: Neighbor Type
Path: Configuration Manager > Protocols > IP > ST2 > Neighbors
Default: Local
Options: Local
| Tunnel
Function: Specifies the type of connection to this neighbor.
Instructions: Set this parameter to Tunnel if the router is connected to the neighbor via an
ST2 tunnel.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.3.1.2.6
Seitenansicht 98
1 2 ... 94 95 96 97 98 99 100 101 102 103

Kommentare zu diesen Handbüchern

Keine Kommentare