Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Bedienungsanleitung PDF herunterladen (Seite 71)

Configuring BOOTP Services

2-9

For each BOOTP parameter, this chapter provides information about default

settings, valid parameter options, the parameter function, instructions for setting

the parameter, and the MIB object OID.

The Technician Interface allows you to modify parameters by issuing

set and

commit commands with the MIB object ID. This process is equivalent to

modifying parameters using Site Manager. For more information about using the

Technician Interface to access the MIB, refer to Using Technician Interface

Software.

Editing BOOTP Relay Agent Parameters

To edit BOOTP relay agent parameters, begin at the Conﬁguration Manager

window (refer to Figure 1-3) and proceed as follows:

1. Select Protocols➔IP➔BOOTP➔Relay Agent Interface Table.

The BOOTP Relay Agent Interface Table window appears (Figure 2-4). This

window lists all the IP interfaces that you have conﬁgured for BOOTP

services on the router.

Figure 2-4. BOOTP Relay Agent Interface Table Window

Caution: The Technician Interface does not verify that the value you enter for

a parameter is valid. Entering an invalid value can corrupt your

conﬁguration.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 107 108

Keine Kommentare

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Bedienungsanleitung Seite 71