Avaya Configuring VINES Services Bedienungsanleitung PDF herunterladen (Seite 49)

114054 Rev. A 3-1

Chapter 3

Enabling VINES Services

This chapter describes how to enable VINES services. It assumes you have read

Conﬁguring Routers and that you have

1. Opened a conﬁguration ﬁle

2. Speciﬁed router hardware if this is a local mode conﬁguration ﬁle

3. Selected the link or net module connector on which you are enabling VINES,

or conﬁgured a WAN circuit if this connector requires one

When you enable VINES services on a circuit, you do not have to conﬁgure any

VINES parameters. The Conﬁguration Manager supplies default values for all

VINES parameters. If you want to edit these default values, refer to Chapter 4.

Enabling VINES on an Interface

To enable VINES on an interface, complete the following steps:

1. Select VINES from the Select Protocols menu.

The Select Protocols menu appears after you either select a link or net module

connector, or ﬁnish conﬁguring a WAN circuit.

2. Click on OK to exit from the Select Protocols menu.

The window in Figure 3-1 appears.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Keine Kommentare

Avaya Configuring VINES Services Bedienungsanleitung Seite 49