Avaya Configuring IP Utilities Bedienungsanleitung PDF herunterladen (Seite 212)

Configuring IP Utilities

C-4

308631-14.00 Rev 00

Specifying the Network to Which the Policy Applies

You must specify the IP address or range of contiguous addresses to which the

policy that you created applies. Navigate to the policy-specify prompt (for

example,

box; ip; access-policy/policy_1

) and enter:

network

<ip_address/ip_mask>

ip_address/ip_mask

is an address/mask pair indicating the IP address or range of

IP addresses to which this policy applies.

For example, the following command specifies 192.32.150.0/255.255.255.0 as the

address and mask to which policy_1 applies:

access-policy/policy_1#

network 192.32.150.0/255.255.255.0

network/policy_1/192.32.150.0/255.255.255.0#

Disabling and Reenabling a Policy

By default, the access policy is enabled on the router.

To change the state of the global IP access policy that you created, navigate to the

policy-specific prompt (for example,

box; ip; access-policy/policy_1

) and enter:

state

<state>

state

is:

enabled

(default)

disabled

For example, the following command disables policy_1:

access-policy/policy_1#

state disabled

access-policy/policy_1#

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 227 228

Keine Kommentare

Avaya Configuring IP Utilities Bedienungsanleitung Seite 212