Avaya Connecting ASN Routers and BNX Platforms to a Network Bedienungsanleitung PDF herunterladen (Seite 64)

Connecting ASN Routers and BNX Platforms to a Network

3-14

Enabling Relay Interfaces

You must enable BOOTP relay (also called BOOTP pass-through or gateway) on

all interfaces in the paths between the booting routers and the BOOTP server.

Figure 3-5 shows an example of a network with BOOTP gateways.

Figure 3-5. Enabling BOOTP in a Sample Network

Enable BOOTP relay on an interface as follows:

1. Click on the connector in the Conﬁguration Manager window.

2. Select Edit Circuit in the Edit Connector window.

3. Select Protocols➔Add in the Circuit Deﬁnition window.

4. Select BOOTP in the Select Protocols window and click on OK.

5. Select File➔Exit to exit the Circuit Deﬁnition window.

Enable BOOTP on

these interfaces

Corporate backbone

Router A

Router C

Router B

BOOTP server

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 105 106

Keine Kommentare

Avaya Connecting ASN Routers and BNX Platforms to a Network Bedienungsanleitung Seite 64