Avaya SIP Software 3.2 for 1200 Series Bedienungsanleitung Seite 107

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 320
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 106
TLV Fields
0x00 0x00 (Protocol Identity field from STP BPDU)
0x00
2. 802.1x:
Length = 3
Protocol identity = 0x888E—(802.1x Ethertype)
0x01—(Version field from 802.1x frame)
3. LLDP:
Length = 2
Protocol identity = 0x88CC—(LLDP Ethertype)
MAC/PHY Configuration/Status Auto-negotiation support/status =
Bit 0 = 1 [Auto-negotiation supported]
Bit 1 = 1 or 0, depending on the current auto-negotiation
status, for example, either enabled or disabled.
PMD auto-negotiation advertised capability = 0x4000 -
10BASE-T half duplex mode
0x2000 - 10BASE-T full duplex mode
0x0800 - 100BASE-TX half duplex mode
0x0400 - 100BASE-TX full duplex mode
Operational MAU Type =
10 – UTP MAU, 10BT, half duplex mode
11 – UTP MAU, 10BT, full duplex mode
15 - 2-pair Category 5 (CAT5) UTP, 100BT, half duplex
mode
16 - 2-pair CAT5 UTP, 100BT, full duplex mode
Power Via MDI MDI power support = 0:
Bit 0 = 0 – Powered Device
Bit 1 = 0 – PSE MDI power not supported
Bit 2 = 0 – PSE MDI power state disabled
Bit 3 = 0 – PSE pair selection can not be controlled
PSE power pair = 1
Power Class = 2 for 1220/1230 IP Deskphones
Power Class = 3 for 2007/1120E/1140E/1165E IP
Deskphones
Link Aggregation Aggregation status = 0; the link is not capable of being
aggregated, and currently is not in aggregation.
Aggregated Port ID = 0
Maximum frame size The MAC/PHY supports an extension of the basic MAC
frame format for Tagged MAC frames. The maximum
frame size is configured to 1522.
LLDP-MED System Capabilities Bit 0 = 1—LLDP-MED Capabilities–supported
Bit 1 = 1—Network Policy–supported
Bit 2 = 1—Location Identification–supported
TLVs
SIP Software for Avaya 1200 Series IP Deskphones-Administration January 2012 107
Seitenansicht 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 319 320

Kommentare zu diesen Handbüchern

Keine Kommentare