
Job Aid
The following table to understand the Add User Endpoint Web page fields.
Field Description
User name Enter a User name for the endpoint. The endpoint’s user name must
be alphanumeric (a…z, A…Z, 0…9) and can be up to 30 characters
in length. The user name, together with the Service Domain names,
becomes a string that is used to build the user’s SIP URI.
Frequently, this field is configured with the user's extension number.
Example 5340
User endpoint
description
The endpoint’s description can use most keyboard characters
(except single quotes) and can be up to 120 characters in length.
Frequently, this field is configured with the user's name.
Example John Smith
Trust Node The checkbox should be cleared.
Tandem gateway
endpoint name
Configure the field to Not Configured.
L0 directory number
(DN)
This field is a number that is based on the user's directory number.
The number cannot match entries in the dial plan.
L1 directory number
(DN) prefix
Leave as default.
E.164 local directory
number (DN) prefix
Leave as default.
E.164 Area Code Leave as default.
E.164 Country Code Leave as default.
Authentication
enabled
Select Authentication on from the drop-down list to enable
authentication for this endpoint.
Authentication
password
The password must be alphanumeric and can be up to 24 characters
in length.
Adding an NRS Routing rule for the Avaya 3100 Mobile
Communicator Gateway
Use this procedure to create an NRS Routing rule to route calls to the Avaya 3100 Mobile
Communicator Gateway using the Mobility Prefix.
Avaya CS 1000 configuration for client support
122 Deployment Guide October 2010
Kommentare zu diesen Handbüchern