Avaya E1 Bedienungsanleitung PDF herunterladen (Seite 24)

Installing E1 Net Modules in ASN Platforms

1-2

115375-A Rev. A

Removing the Component Tray

To remove the component tray:

Turn off the ASN.

Detach all cables from the ASN back panel.

Using a Phillips screwdriver, loosen the two captive screws that fasten the

tray to the chassis (Figure 1-1).

Pull the two captive screws and gently slide the tray out of the chassis

igure 1-1).

Hold the sides and bottom of the tray to support it, and try to keep the tray

level as you slide it out.

Place the tray on a sturdy work surface.

Caution:

Do not touch any components or boards in the ASN until you have

attached an antistatic wrist strap. See the next section, “Attaching the

Antistatic Wrist Strap.”

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Keine Kommentare

Avaya E1 Bedienungsanleitung Seite 24