Avaya B5800 Bedienungsanleitung PDF herunterladen (Seite 137)

7. Select File > Save Configuration.

Setting the trunk prefixes

About this task

Where a prefix has been implemented for outgoing calls, that same prefix needs to be added

to trunk settings. The prefix is then used as follows:

• On incoming calls the prefix is added to any incoming ICLID received with the call. That

allows the ICLID to be used by B5800 Branch Gateway phones and applications to make

return calls.

• On outgoing calls, the short codes used to route the call to a trunk must remove the dialing

prefix.

Procedure

1. From the System Manager console, select the B5800 Branch Gateway device and

click Edit to edit the system configuration for the device. IP Office Manager will be

launched on your PC. For more information, see

Editing a B5800 Branch Gateway

system configuration from System Manager on page 157.

2. In the left navigation pane, click Line.

3. For each line enter the prefix. The location of the relevant setting varies for each

trunk type.

• For analog trunks, select the Line Settings tab and enter the prefix in the

Prefix field.

• For T1 and T1 PRI trunks, select the PRI 24 Line tab and enter the prefix in

the Prefix field.

• For BRI, E1 PRI, and QSIG trunks, select the PRI Line tab and enter the

appropriate prefix in the following fields:

- Prefix

- National Prefix

- International Prefix

4. Select File > Save Configuration.

Setting the trunk prefixes

Implementing the Avaya B5800 Branch Gateway for an Avaya Aura

Configuration October 2012 137

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 313 314

Keine Kommentare

Avaya B5800 Bedienungsanleitung Seite 137