Avaya 1200-Series Anwendungshinweis PDF herunterladen (Seite 22)

FS; Reviewed:

SPOC 09/07/2010

Solution & Interoperability Test Lab Application Notes

22 of 44

11xx12xx-SM

2.

Enter the change route-pattern n command, where n is the route-pattern to be

configured, in this case 60. On Page 1 of the form configure the following fields as

shown in the screen below:

 Pattern name – Set to an appropriate name.

 Grp No – Set to the trunk group being used, in this case 60 (see Section 5.6).

 FRL – Set to 0 (lowest restriction, or a higher number if appropriate).

 No. Del Dgts - Set to 0 (all digits are being sent).

 LAR – Set to next for the first row. This recommended so that in the case of

network failures, the shorter Alternate Route Timer (10 seconds) will be used as

the time-out value rather than the Session Establishment Timer (3 minutes),

before reorder feedback is provided to the caller. These timers are specified on

the SIP signaling form (See Section 5.5).

change route-pattern 60 Page 1 of 3

Pattern Number: 60 Pattern Name: SM ES

SCCAN? n Secure SIP? n

Grp FRL NPA Pfx Hop Toll No. Inserted DCS/ IXC

No Mrk Lmt List Del Digits QSIG

Dgts Intw

1: 60 0 0 n user

2: n user

3: n user

4: n user

5: n user

6: n user

BCC VALUE TSC CA-TSC ITC BCIE Service/Feature PARM No. Numbering LAR

0 1 2 M 4 W Request Dgts Format

Subaddress

1: y y y y y n n rest next

2: y y y y y n n rest none

3: y y y y y n n rest none

4: y y y y y n n rest none

5: y y y y y n n rest none

6: y y y y y n n rest none

Avaya 1200-Series Anwendungshinweis Seite 22