Avaya 1200-Series Anwendungshinweis PDF herunterladen (Seite 41)

FS; Reviewed:

SPOC 09/07/2010

Solution & Interoperability Test Lab Application Notes

41 of 44

11xx12xx-SM

Enter status trunk n, where n is the member in the active state as noted in the previous

step for verification of codec used and shuffling status:

 Codec Type – The codec used for Audio is G.722-64k in this example.

 Shuffling - If the Near-end and Far-end IP addresses for Audio belong to the

Avaya 1100- and/or 1200-Series IP Deskphones and the Audio Connection Type

is ip-direct, it signifies that shuffling was successful. In this example, shuffling

was successful.

status trunk 60/6 Page 2 of 3

CALL CONTROL SIGNALING

Near-end Signaling Loc: 01A0017

Signaling IP Address Port

Near-end: 10.1.2.160 : 5060

Far-end: 10.1.2.170 : 5060

H.245 Near:

H.245 Far:

H.245 Signaling Loc: H.245 Tunneled in Q.931? no

Audio Connection Type: ip-direct Authentication Type: None

Near-end Audio Loc: Codec Type: G.722-64k

Audio IP Address Port

Near-end: 10.1.2.143 : 5058

Far-end: 10.1.2.144 : 5032

Video Near:

Video Far:

Video Port:

Video Near-end Codec: Video Far-end Codec:

Verify that speed dial buttons defined locally at the phone are displayed. If any are

missing or are inoperative, check the local settings or the configuration file.

Verify additional Communication Manager features by pressing the speed dial button for

the feature, or lifting the handset and dialing the FNE. If busy or intercept tone is heard,

check Communication Manager for the correct FNE, proper permissions under

COS/COR, and the proper station button assignment to support the feature.

Call a telephone that currently has no voice messages, and leave a message. Verify that

the message-waiting indicator illuminates on the called telephone. Press the messages

button on that telephone and verify that the voice messaging system is called. Use the

voice messaging menus to retrieve and delete the voice message, verifying that DTMF is

interpreted correctly by the system, and that the message waiting indicator extinguishes.

9. Conclusion

These Application Notes have described the administration steps required to use Avaya 1100-

and 1200 Series IP Deskphones with SIP software with Session Manager, Communication

Manager, and Modular Messaging. Basic, supplementary, and extended feature sets were

covered. The extended set relies on Communication Manager Evolution Server and Feature

Name Extensions to support additional SIPPING features described in RFC 5359.

1 2 ... 36 37 38 39 40 41 42 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya 1200-Series Anwendungshinweis Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya 1200-Series