Avaya Business Communications Manager 5.0 - Configuration - System Bedienungsanleitung PDF herunterladen (Seite 41)

BCM 5.0 configuration with Telset Administration 41

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

Configuring the IP address

Configure the BCM IP address for full network connectivity.

Prerequisites

You must enter the keycode for your BCM 5.0 system to access the features.

For more detailed information about retrieving and entering the keycode for

your system, see the Keycode Installation Guide (NN40010-301).

Procedure steps

Step Action

1 Select Feature 9*8 from a two-line display telephone.

2 Enter the following user ID and password:

• User ID: SETNNA

• Password: CONFIG

The numerical values of the user ID and password are 738662 and 266344,

respectively.

3 Press OK.

4 Press NEXT to scroll through the menu and select IP Address.

5 Press OK.

6 Press CHNGE to modify the IP settings.

The display screen shows whether DHCP is enabled or disabled.

7 Press DIS to disable DHCP or ENL to enable DHCP.

The system must reboot to enable DHCP.

8 Press IP to modify the following IP settings:

• IP Address

• Subnet Mask

• Default Gateway

These settings have no effect if the DHCP is disabled.

9 Press Back and select System Restart to reboot the system.

--End--

Configuring the modem

Configure the BCM system modem to provide connection to the system

through the modem.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 223 224

Keine Kommentare

Avaya Business Communications Manager 5.0 - Configuration - System Bedienungsanleitung Seite 41