Avaya Business Communications Manager 5.0 - Configuration - System Bedienungsanleitung PDF herunterladen (Seite 98)

98 Dial-up resources configuration

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

Procedure steps

Step Action

1 Click

Configuration > Resources > Dial Up Interfaces > Dial-out

Interfaces tab.

2 Click Add.

The Add Dial Up Interface dialog box appears.

3 Select Modem from the Interface type drop-down list.

4 Enter a logical name in the Interface name field.

5 Select the Automatic dialout check box to use this interface for scheduled

service.

6 Click OK.

The interface appears in the Dial-out Interfaces table.

--End--

Enabling a modem interface

An interface must be enabled to function as a backup connection. If the

BCM450 experiences a primary connection failure, it will dial-out using the

dial-up interface configured as the backup.

Procedure steps

Step Action

1 Click

Configuration > Resources > Dial Up Interfaces.

2 On the Dial-out Interfaces tab, select the modem.

3 On the Link Parameters tab, enter the Dial-out number for the modem.

4 On the Dial-out Interfaces table, select the Enable check box for the

modem.

The interface is now enabled.

--End--

Disabling a modem interface

Use this procedure to disable a modem interface.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 223 224

Keine Kommentare

Avaya Business Communications Manager 5.0 - Configuration - System Bedienungsanleitung Seite 98