Avaya Configuring AppleTalk Services Bedienungsanleitung PDF herunterladen (Seite 102)

Configuring AppleTalk Services

4-14

This re-enables the AppleTalk interface and implements your changes to the

zone list.

11. Click on Done to exit the AT Interface Conﬁguration window.

Changing the AppleTalk Default Zone

When you initially conﬁgure an AppleTalk interface, you specify a Default Zone

for the interface only if you want it to function as a seed router. If the interface

functions as a nonseed router, then you leave the Default Zone parameter ﬁeld

blank.

To change the Default Zone for a seed router interface, begin at the Conﬁguration

Manager window (F

igure 4-1) and proceed as follows:

1. Select Protocols➔AppleTalk➔Interfaces.

The AT Interface Conﬁguration window appears (F

igure 4-3).

2. Set the Enable parameter to Disable.

3. Click on Apply.

This disables the AppleTalk interface so that you can change the default zone.

4. Click on an AppleTalk interface to select it.

5. Specify a new Default Zone at the Default Zone parameter.

6. Click on Apply.

7. Click on Done to exit the window.

8. If you are conﬁguring the AppleTalk router in dynamic mode, wait 10

minutes to allow all routers on the network to time out the network and

zone information from their zone information tables.

9. Set the Enable parameter to Enable.

10. Click on Apply.

This re-enables the AppleTalk interface and implements your changes to the

zone list.

11. Click on Done to exit the AT Interface Conﬁguration window.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 123 124

Keine Kommentare

Avaya Configuring AppleTalk Services Bedienungsanleitung Seite 102