Avaya Configuring APPN Services Bedienungsanleitung PDF herunterladen (Seite 105)

Editing APPN Parameters

308963-14.00 Rev 00

3-45

Click on OK to save your entries to the configuration file.

The APPN Adjacent Link Station List window (Figure 3-8

) reappears.

Parameter: Adjacent Link Station Name

Default: None

Options: Any name with up to 8 uppercase alphabetic characters

Function: Specifies a unique name for the link station (control point) in the adjacent

node. This name differentiates this link station from other defined link

stations.

Instructions: Specify the link station name with up to 8 uppercase characters. Do not

specify numbers in the name.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.4.1.3

Parameter: Adjacent Node Name

Default: The Configuration Manager uses the local NETID for the NETID portion

of this parameter. You can change the name if the adjacent node had a

different NETID.

Options: Any valid name with up to 17 characters in the format

<NETID>

<NAME>

;

NETID

is the unique network name with up to 8

characters followed by a period, and

NAME

is the control point name with

up to 8 characters.

Function: Identifies the user-specified name of the network and the adjacent node

name.

Instructions: Type up to 8 characters for the network ID name; follow with a period;

then type a control point name with up to 8 characters. You must use

uppercase characters only and the first character must be non-numeric.

Blank spaces (leading, trailing, and embedded) are not allowed in the

node name. For example, APPNNODE.CPONE is a valid entry for this

parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.4.1.6

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 149 150

Keine Kommentare

Avaya Configuring APPN Services Bedienungsanleitung Seite 105