Avaya Configuring APPN Services Bedienungsanleitung PDF herunterladen (Seite 49)

Enabling APPN Services

308963-14.00 Rev 00

2-9

Parameter: SR Bridge Internal LAN ID

Default: 0x1

Range: 0x1 to 0x0fff

Function: Specifies this bridge’s internal LAN ID.

Instructions: Assign an internal LAN ID that is unique among all other internal LAN

IDs and ring IDs in the network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.1.4

Parameter: SR Bridge ID

Default: 0x1

Range: 0x1 to 0x0f

Function: Specifies this bridge’s ID and identifies the Nortel Networks source

routing bridges in the network.

Instructions: Assign the same value to all Nortel Networks source routing bridges in

the network (unless two bridges operate in parallel). The SR bridge ID

must be unique among any other third-party bridge IDs in the network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.1.2.1.5

For details about configuring the source routing parameters on this window, refer

to Configuring Bridging Services.

Click on OK.

The Edit SR Interface window appears (Figure 2-7

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 149 150

Keine Kommentare

Avaya Configuring APPN Services Bedienungsanleitung Seite 49