Avaya Configuring BOOTP Services Bedienungsanleitung PDF herunterladen (Seite 15)

308644-14.00 Rev 00

Preface

This guide describes Simple Network Management Protocol (SNMP), Bootstrap

Protocol (BootP), BootP/Dynamic Host Configuration Protocol (DHCP) relay,

and DHCP server and what you need to do to start and customize them on a Nortel

Networks

™

router.

You can use the Bay Command Console (BCC

™

) or Site Manager to configure

these services on a router. In this guide, you will find instructions for using both

the BCC and Site Manager.

Before You Begin

Before using this guide, you must complete the following procedures. For a new

router:

• Install the router (see the installation guide that came with your router).

• Connect the router to the network and create a pilot configuration file (see

Quick-Starting Routers, Configuring BayStack Remote Access, or Connecting

ASN Routers to a Network).

Make sure that you are running the latest version of Nortel Networks BayRS

™

and

Site Manager software. For information about upgrading BayRS and Site

Manager, see the upgrading guide for your version of BayRS.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 173 174

Keine Kommentare

Avaya Configuring BOOTP Services Bedienungsanleitung Seite 15