Avaya Configuring BOOTP Services Bedienungsanleitung PDF herunterladen (Seite 26)

Configuring SNMP, BootP, and DHCP Services

1-6

308644-14.00 Rev 00

Using Site Manager

To start SNMP, complete the following tasks:

Starting BootP Services

Using Site Manager, you can start BootP using default values for all parameters. If

you decide to change some or all of the default values, see Chapter 4,

“Customizing BootP.”

Before you begin, verify that IP is configured on an interface, as described in

“Configuring IP for Global Protocols

” on page 1-2. You can also enable IP and

BootP on an interface simultaneously.

To enable BootP on an interface, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols.

The Protocols menu opens.

2. Choose

IP.

The IP menu opens.

3. Choose

SNMP.

The SNMP menu opens.

4. Choose

Global.

The Edit SNMP Global Parameters

window opens.

5. Click on

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the link or net module connector.

The Edit Connector window opens.

2. Choose

Edit Circuit

. The Circuit Definition window opens.

3. Choose

Protocols

. The Protocols menu opens.

4. Choose

Add/Delete

. The Select Protocols window opens.

5. Choose

BOOTP

and click on

(continued)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 173 174

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring BOOTP Services Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring BOOTP Services