
Customizing DVMRP
117355-C Rev 00
4-45
Specifying the Lifetime of a Prune Message
By default, a prune message that DVMRP sends to a neighbor on this interface has
a lifetime of 7,200 seconds.
You can use the BCC or Site Manager to specify a lifetime value from 0 to 86,400
seconds.
Using the BCC
Navigate to a DVMRP interface-specific prompt and enter:
prune-lifetime
<
seconds
>
seconds
is the lifetime of the prune message in seconds.
For example, the following command sets the lifetime value to 5,000 seconds for
prune messages that DVMRP sends on IP interface 2.2.2.2:
dvmrp/2.2.2.2#
prune-lifetime 5000
dvmrp/2.2.2.2#
Using Site Manager
To specify the lifetime of a prune message:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
DVMRP
. The DVMRP menu opens.
4. Choose
Circuit
. The DVMRP Circuit Parameters window
opens.
5. Set the
Prune Life Time
parameter. Click
on
Help
or see the parameter description
on page A-11.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Kommentare zu diesen Handbüchern