
Configuring IP Multicasting and Multimedia Services
4-64
117355-D Rev 00
Listening for a Default Route
By default, DVMRP listens for a default route on this tunnel. You can use the
BCC or Site Manager to disable or reenable this feature as required.
Using the BCC
To prevent a DVMRP tunnel from listening for a default route, or to reenable such
listening, navigate to a DVMRP tunnel prompt (for example,
box; tunnels;
dvmrp/2.2.2.2/2.2.4.5
) and enter:
default-listen
<state>
state
is one of the following:
enabled
(default)
disabled
For example, the following command configures DVMRP to stop listening for a
default route on tunnel 2.2.2.2/4.4.3.2:
tunnel/2.2.2.2/4.4.3.2#
default-listen disabled
tunnel/2.2.2.2/4.4.3.2#
Using Site Manager
To listen for a default route, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
DVMRP
. The DVMRP menu opens.
4. Choose
Tunnel
. The DVMRP Tunnel Parameters window
opens.
5. Set the
Route Listen
parameter. Click on
Help
or see the parameter description on
page A-14.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Kommentare zu diesen Handbüchern