Avaya Configuring IP Multicasting and Multimedia Services Bedienungsanleitung PDF herunterladen (Seite 161)

Customizing DVMRP

117355-D Rev 00

4-71

Examples

To specify a network address that must match the DVMRP policy, navigate to the

DVMRP unicast accept policy prompt and enter the following commands:

unicast-accept/dvmrppol2/dvmrp# match

match/dvmrp/unicast-accept/dvmrppol2# network address 192.31.27.85

mask 255.255.255.0 match exact

network/192.31.27.85/255.255.255.0/exact/dvmrp/unicast-accept/

dvmrppol2#

To inject a different network into the DVMRP routing table, navigate to the

DVMRP unicast accept policy prompt and enter the following commands:

unicast-accept/dvmrppol1/dvmrp# modify

modify/dvmrp/unicast-accept/dvmrppol1# inject address 199.234.64.89

mask 255.255.255.0

inject/199.234.64.89/255.255.255.0/dvmrp/unicast-accept/dvmrppol1#

To set a precedence, preference, metric, or type other than the default, follow these

examples:

unicast-accept/dvmrppol2/dvmrp# precedence 3

unicast-accept/dvmrppol2/dvmrp# preference 8

unicast-accept/dvmrppol2/dvmrp# metric 4

unicast-accept/dvmrpol2/dvmrp# type ospf

preference 0 (d) through 16 Specifies a value that DVMRP uses to compare the injected route

to an existing route in the DVMRP routing table, higher preferred.

This parameter has meaning only if the action is set to accept.

If the injected unicast route is preferred, set the preference to a

higher number than the value of the existing route. A route

learned from a DVMRP network always has a preference of 1.

type best route (d)

OSPF

both

Specifies whether the route used is best-route, OSPF, or both.

Table 4-4. DVMRP Unicast Accept Policy BCC Parameters

(continued)

Parameter Values (d = default) Description

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 379 380

Keine Kommentare

Avaya Configuring IP Multicasting and Multimedia Services Bedienungsanleitung Seite 161