Avaya Configuring OSI Services Bedienungsanleitung PDF herunterladen (Seite 102)

Configuring OSI Services

4-28

303535-A Rev 00

Parameter: External Address (hex)

Default: None

Options: Any valid address

Function: Specifies the destination address of the external adjacency.

Instructions: Enter the address assigned to the external adjacency in hexadecimal

format.

MIB Object ID: 1.3.6.1.4.1.18.3.5.6.4.5

Parameter: SNPA

Default: None

Options: Depends on the circuit type (see Instructions)

Function: Specifies an SNPA for the adjacent end system.

Instructions: Enter the SNPA for the adjacent end system as follows:

• If this circuit is an X.25 PDN circuit, then enter a valid X.121 address

for the remote router in decimal format.

• If this circuit is an X.25 DDN circuit, then enter a valid X.121 address

for the remote router in decimal format.

• If this circuit uses PPP, then leave this field blank.

• If this circuit is of any other type, then enter any valid MAC address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.6.4.6

Note: To enter a valid X.121 address for an X.25 DDN circuit, you must

convert the remote IP address to an X.121 address. (See Appendix A,

“IP-to-X.121 Address Mapping for DDN,” for the conversion algorithm.)

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 137 138

Keine Kommentare

Avaya Configuring OSI Services Bedienungsanleitung Seite 102