Avaya Configuring OSI Services Bedienungsanleitung PDF herunterladen (Seite 83)

Editing OSI and TARP Parameters

303535-A Rev 00

4-9

Parameter: L2 LSP Password

Default: None

Options: Any text string, 8 characters maximum

Function: Assigns a password to the Level 2 link state packets (LSP), partial

sequence number packets (PSNP), and complete sequence number

packets (CSNP) that the router (L1/L2) generates and accepts.

The router uses LSP information to make routing decisions, and PSNP

and CSNP information to make sure that its LSP database is up to date.

You use the L2 LSP password as a security device for restricting the

routing of data. If you add a password to LSPs from a router, only routers

with the same password accept and exchange LSPs. To restrict routing,

you assign identical L2 LSP passwords to all routers located in the

domain through which you wish to route data. When the OSI router

floods Level 2 LSPs through the area, only those routers that have been

assigned the same password accept the LSPs.

Instructions: If you do not want to assign an L2 LSP password to this router, then leave

this field blank. If you assign an L2 LSP password to this router, then you

must assign the same L2 LSP password to every router in the domain with

which this router communicates.

MIB Object ID: 1.3.6.1.4.1.18.3.5.6.1.15

Note: If you set the Router Type parameter for this router to Level 1 only, then

the router ignores this parameter.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 137 138

Keine Kommentare

Avaya Configuring OSI Services Bedienungsanleitung Seite 83