Avaya Configuring RADIUS Bedienungsanleitung PDF herunterladen (Seite 36)

Configuring RADIUS

2-4

308640-15.1 Rev 00

Using the BCC

To enable RADIUS and configure the IP addresses for a RADIUS client and

server:

Start configuration mode by entering:

bcc>

config

Configure RADIUS on the box.

box# radius

Configure a slot and address for the RADIUS client.

radius# radius-client slot

<slot_number>

address <client_address>

slot_number

specifies the router slot you want to configure for RADIUS.

client_address

specifies the IP address of the RADIUS client

For example, the following command configures the RADIUS client on slot

3, at the IP address 192.32.1.1, and with default values for all the optional

parameters:

radius# radius-client slot 3 address 192.32.1.1

Navigate to the top-level RADIUS prompt.

radius-client/3# back

Configure an address for the RADIUS server.

radius#

radius-server address <server_address>

server_address

specifies the IP address of the RADIUS server

For example, the following command configures the RADIUS server for both

accounting and authentication at the IP address 192.32.10.1:

radius#

radius-server address 192.32.10.1

The above command changes the prompt to the following:

radius-server/192.32.10.1#

Note:

By default, the accounting and authentication services are disabled. To

effectively use RADIUS, see page 3-3

and enable one of these services.

To configure the same RADIUS configuration on one or more slots, see

“

Configuring Multiple RADIUS Clients” on page 2-8.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 115 116

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring RADIUS Bedienungsanleitung Seite 36

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring RADIUS