Avaya Configuring RADIUS Bedienungsanleitung PDF herunterladen (Seite 46)

Configuring RADIUS

3-6

308640-15.1 Rev 00

Modifying Router Access

You can modify access to the router by enabling or disabling the user/manager

lock. The lock is disabled by default, allowing access by all users with the user or

manager profile, and also by individual users with a unique profile.

To restrict access to individual users only, access the Technician Interface and

enter the command:

set wfuserAccess.wfUserManagerLock.0

Set

to enable the lock; this locks out the user and manager profile,

and limits access to individual users with a unique profile.

Set

(default) to disable the user/manager lock, allowing access by all

users with the manager or user profile, in addition to users with a unique profile.

When you enable the user/manager lock, and a RADIUS server is unavailable for

authentication, the router automatically disables the user/manager lock. When the

RADIUS server becomes available, the router automatically enables the

user/manager lock.

To view the current configuration of the user/manager lock, enter the command:

get wfuserAccess.wfUserManagerLock

Modifying the PPP Authentication Protocol

The remote user identifies itself to the server using one of the PPP authentication

protocols, CHAP or PAP. It includes either a CHAP name and secret or a PAP ID

and password in the access challenge to the server. CHAP is the default

authentication protocol. For more information about PPP, refer to Configuring

PPP Services.

Note:

Be sure you configure RADIUS and assign the appropriate access to

individuals with unique profiles before you enable the user/manager lock;

otherwise you may lock out system managers from the router.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 115 116

Keine Kommentare

Avaya Configuring RADIUS Bedienungsanleitung Seite 46