Avaya Configuring SDLC Services Bedienungsanleitung PDF herunterladen (Seite 42)

Configuring SDLC Services

4-4 114053 Rev. A

Parameter: Enable

Default: Enable

Options: Enable

| Disable

Function: Enables or disables the system software mechanisms that use the SDLC

interface on a synchronous circuit.

The system software also performs the following actions when you

choose a setting:

Disable -- Switches every SDLC interface enabled on the router to the

disabled (inactive) state.

Enable -- Reinitializes every SDLC interface on the router, based on

• The current setting of the associated interface Enable parameter

• The current state of the associated circuit

Instructions: Select Disable to switch every SDLC interface existing on the node to the

inactive state.

Select Enable only when an existing SDLC interface is in the disabled

state. You can choose Enable to globally reinitialize all SDLC interfaces

conﬁgured on the node. Then, each interface maintains the most recent

setting of its own interface Enable parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.1.2

Editing SDLC Interface Parameters

To access and edit the SDLC interface parameters, begin at the Conﬁguration

Manager window (refer to Figure 4-1) and proceed as follows:

1. Select Protocols > SDLC > Interfaces.

The SDLC Interface Conﬁguration window appears (Figure 4-3).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 73 74

Keine Kommentare

Avaya Configuring SDLC Services Bedienungsanleitung Seite 42