Avaya Troubleshooting Routers Anleitung zur Fehlerbehebung Seite 173

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 266
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 172
Reading the Event Log
117379-A Rev. A A-19
The PPP link over the dial-on-demand circuit establishes an LCP (Link Control
Protocol) connection. The messages beginning with message 57 show that the IP
software starts and establishes a connection over the dial-on-demand link.
# 52: mm/dd/yy 14:15:32.552 TRACE SLOT 2 PPP Code: 43
Sending LCP Configure-Request on circuit 3.
# 53: mm/dd/yy 14:15:32.681 TRACE SLOT 2 PPP Code: 55
Received LCP Configure-Ack on circuit 3.
# 54: mm/dd/yy 14:15:34.867 TRACE SLOT 2 PPP Code: 43
Sending LCP Configure-Request on circuit 3.
# 55: mm/dd/yy 14:15:34.875 TRACE SLOT 2 PPP Code: 54
Received LCP Configure-Request on circuit 3.
Sending LCP Configure-Ack on circuit 3.
# 56: mm/dd/yy 14:15:34.992 TRACE SLOT 2 PPP Code: 55
Received LCP Configure-Ack on circuit 3.
# 57: mm/dd/yy 14:15:34.992 INFO SLOT 2 PPP Code: 38
Link Establishment Phase complete on circuit 3.
Starting Network Control Protocols on circuit 3.
# 58: mm/dd/yy 14:15:34.992 TRACE SLOT 2 PPP Code: 43
Sending IPCP Configure-Request on circuit 3.
# 59: mm/dd/yy 14:15:34.996 INFO SLOT 2 PPP Code: 28
LCP up on circuit 3.
# 60: mm/dd/yy 14:15:35.003 TRACE SLOT 2 PPP Code: 54
Received IPCP Configure-Request on circuit 3.
# 61: mm/dd/yy 14:15:35.007 TRACE SLOT 2 PPP Code: 63
IPCP Naking IP-Address option value 0x0 with value 0x3030301 on circuit
3.
Sending IPCP Configure-Nak on circuit 3.
# 66: mm/dd/yy 14:15:35.117 TRACE SLOT 2 PPP Code: 55
Received IPCP Configure-Ack on circuit 3.
# 67: mm/dd/yy 14:15:35.128 TRACE SLOT 2 PPP Code: 54
Received IPCP Configure-Request on circuit 3.
# 68: mm/dd/yy 14:15:35.132 TRACE SLOT 2 PPP Code: 44
Sending IPCP Configure-Ack on circuit 3.
# 69: mm/dd/yy 14:15:35.132 INFO SLOT 2 PPP Code: 28
IPCP up on circuit 3.
The following messages indicate that the Raise DTR signal causes the software to
establish the link and activate the upper-layer protocol. ULI stands for upper-layer
indication:
# 70: mm/dd/yy 14:15:35.136 DEBUG SLOT 2 SWSERV Code: 46
Connector COM2: FSM State: RDTR_WAIT_FOR_ULI(3)
Connector COM2: FSM Event: RDTR_EVENT_ULI_IND(8); isdn flags: 0x22e
# 71: mm/dd/yy 14:15:56.980 DEBUG SLOT 2 SWSERV Code 46
Connector COM2: FSM State: RDTR_CONNECTED(4)
Connector COM2: FSM Event: RDTR_EVENT_DSR_DN(4); isdn flags: 0x224
Seitenansicht 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 265 266

Kommentare zu diesen Handbüchern

Keine Kommentare